Tel
029-81292510WeChat ID
WeChat Official Account
Water, fuel, kerosene, chemical liquid Level
With high low alarm function
Voltage/ current/ resistance output
Flange/ thread mounting
GLTV3 reed switch type water fuel level sensor, it is done by sealed reed switches positioned inside the main shaft of the sensor. A float with built-in magnets then triggers the reed switch relays, generating a potential-signal with resistance, current, or voltage value that increases or decreases according to the fluid level, then give the signal to the gauge via wires, which shows the right level reading by pointer. In the whole reed switch level sensors,the float is the only moving part of the sensor,thereby minimizing potential mechanical failures to get the precision measurement.
Two install connection method :
Product Details:
Two kinds of fuel gauge can be matched:
Application
Generator fuel tanks:
Car water/fuel tanks:
Range | 100~2000mm(OEM) |
---|---|
Resolution | 10~40mm |
Output | Resistance : 0 ~ 190 Ω, 240 ~ 33 Ω (can be customized according to requirements) Current : 0~20mA, 4~20mA Voltage : 0.5~4.5VDC, 0~5VDC |
Medium | Gasoline, Diesel, fuel, Water, Alcohol, Chemicals, etc |
Power | 10-32v |
Operating temp. range | -40~+85℃ |
Wire | PVC material(PA corrugated pipe cover is optional) |
Probe material | Stainless steel 304/316 |
Floats material | Plastic(for oil medium) Stainless steel 304(For drinking water, chemicals, etc.) Stainless steel 316L(For sewage) |
Mounting | BSP 1 1/2",BSP1 1/4" thread twist-in;NPT thread twist-in. flanges :38*2.6mm O-ring /43*3.5mm O-ring.(OEM) |
Customer cooperation